Starting of Slide Show

How to setup USB-FS-PIC32 hardware.

How to use Script Controlled Oscilloscope

Press right arrow, down arrow,spacebar to advance and left arrow or up arrow to go backward

Oscilloscope Board

Windows 32/64 Bit XP/Vista/7/8/10 System

Connecting hardware first time

Please follow the steps to install drivers. Turn the PC on and connect USB cable to hardware

How to Disable Driver Signature Verification on 64-Bit Windows 8.1 or 10

Connecting hardware first time

Please follow steps to install drivers. Turn PC on and connect USB hardware mini USB cable.

How to Disable Driver Signature Verification on 64-Bit Windows 8.1 or 10

Connecting hardware first time

Please follow steps to install drivers. Turn PC on and connect USB hardware mini USB cable.

How to Disable Driver Signature Verification on 64-Bit Windows 8.1 or 10

Connecting hardware first time

Please follow steps to install drivers. Turn PC on and connect USB hardware mini USB cable.

How to Disable Driver Signature Verification on 64-Bit Windows 8.1 or 10

Connecting hardware first time

Please follow steps to install drivers. Turn PC on and connect USB hardware mini USB cable.

How to Enter COM Port number into INI file

Connecting hardware first time

Please follow steps to install drivers. Turn PC on and connect USB hardware mini USB cable.

UNIX/Linux First time connection User

  • Connecting hardware first time
  • 1. Open command prompt on Linux terminal (User name xx)

    2. Run a sudo command $ sudo addgroup vs dialout

    3. Run a sudo command $ sudo addgroup vs plugdev

    4. Reboot: Linux Desktop and Open a linux terminal $ prompt

    5. $ sudo dmesg -C ; clears dmesg buffer

    6. Connect USB Hardware to Linux machine,

    7. Enter $ dmesg command in terminal

    UNIX/Linux First time connection User

  • Connecting hardware first time
  • [ 9211.320675] usb 2-6.4: USB disconnect, device number 7

    [ 9212.046749] usb 2-6.4: new full-speed USB device number 8 using ehci-pci

    [ 9212.157482] usb 2-6.4: New USB device found, idVendor=2429, idProduct=0035

    [ 9212.157487] usb 2-6.4: New USB device strings: Mfr=1, Product=2, SerialNumb

    [ 9212.157490] usb 2-6.4: Product: CDC Calibraion Device TST

    [ 9212.157493] usb 2-6.4: Manufacturer: IWSCOPE Inc Massachusetts

    [ 9212.157916] cdc_acm 2-6.4:1.0: This device cannot do calls on its own. It is not a modem.

    [ 9212.157994] cdc_acm 2-6.4:1.0: ttyACM0: USB ACM device

    1. Launch iwscope application,

    2. Close Application, it creates script.ini file,

    3. Edit script.ini using standard light weight editor like Vi or gedit, enter index of comport number, ttyACM0 has COMPORT=0 and ttyACM1 => COMPORT=1 ….

    UNIX/LINUX Users important

    Connecting hardware first time

    Please follow steps to install drivers. Turn PC on and connect USB hardware mini USB cable.

    Windows/Linux shared library.

    Depends on shared library so please steps must be taken to add in library

    Please do some google around about LD_LIBRARY_PATH

    Linux/UNIX searches path specified by LD_LIBRARY_PATH

    Please add current path where executable are located in LD_LIBRARY_PATH

    Simply add into .bashrc export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$(SCOPE_EXE_DIR)

    Run "sudo add group $USERNAME dialout"

    Bootloader works using HID class Bootloader(Firmware Update Procedure) copy following files to directory /etc/udev/rules.d as bootloader works as HID device. this is mandatory for linux platform for bootloader to work. z010_mchp_tools.rules z011_mchp_jlink.rules

    Dont forget to Reboot

  • Start iwscope application iwscope
  • Starting Scope GUI First time

    How to generate signal (SIN & Rectanle/SQUARE)

    Please follow steps to install drivers. Turn PC on and connect USB hardware mini USB cable.

    Starting Scope GUI First time

    Capturing signals

    Please follow steps to install drivers. Turn PC on and connect USB hardware mini USB cable.